IFT-01 Quick Start Guide
Rev A · November 4, 2026 · Pre-release review copy
IFT-01 is in development. Instructions describe the current development software; controls may differ by installed version.
Download IFT-01 Quick Start Guide (PDF) · Full User Manual · Support
Quick Start
Internal antennas. One power connection. Your EFB.
Power: 5 V DC, 3 A USB-C
Use a regulated 5 V, 3 A USB supply and a sound USB-C cable. This specifies supply capacity, not continuous power consumption.
1 Place the complete unit
Secure IFT-01 where it has a clear view of the sky and cannot obstruct controls or visibility. Keep the vents clear and avoid excessive heat. All antennas are inside; nothing needs attaching.
2 Connect USB-C power
The receiver starts automatically. Allow it to finish starting; GPS may take longer to obtain a fix, particularly after moving to a new location.
3 Join IFT-01 Wi-Fi
On your phone or tablet, select IFT-01. If your device reports no Internet, choose to remain connected. Prevent automatic switching to another Wi-Fi network.
4 Open your compatible EFB
Select the EFB's external ADS-B / GDL90 receiver option if required. Confirm its receiver connection and GPS/traffic indications. The optional IFT-01 Companion app is not required.
Optional: check receiver status
While connected to IFT-01, open http://ift01.local/ in a browser. If it does not open, use http://192.168.10.1/.
Receiving: current messages. Waiting: receiver available, no current messages. No Fix: GPS needs time or better sky visibility. Persistent DEGRADED/FAULT: see the User Manual.
To stop: disconnect power. No shutdown command is needed.
Advisory use: traffic and weather may be incomplete or delayed. Continue to see and avoid; use approved sources for safety-critical navigation and weather. Support: inflighttraffic.com.